CertainTeed Home Energy Audit in Long Beach: What to Know First
We provide independent CertainTeed home energy audit services in Long Beach, typically scheduling within 48 hours and completing the full diagnostic same day. Our written price lands before any work starts, and we publish before-and-after blower-door numbers so you see the actual performance change. If you own a CertainTeed-insulated home in Long Beach, from the 1920s bungalows near Bixby Knolls to the mid-century builds around Rancho Los Cerritos, and you’re seeing uneven temperatures or rising utility bills, this page is for you. Call (424) 415-7031 for a free estimate.
How CertainTeed Products Fail - and How We Fix Them
- CertainTeed InsulSafe SP settled in vaulted ceilings. The blown fiberglass loses loft in cathedral assemblies where roof pitch exceeds 6:12, creating thermal bypass channels we map with thermal imaging. We remove the settled material, seal top plates and electrical penetrations with fire-rated caulk, then reinstall to manufacturer density using a hose with inline depth markers.
- CertainTeed SpeedyRol batt compression in Long Beach’s 1940s-1960s platform-framed walls. Original installers often wedged R-13 batts into 2×4 cavities already crowded with knob-and-tube retrofits, compressing the fiberglass below its labeled R-value and creating convective looping. We extract the compressed batts, air-seal the electrical boxes with putty pads, then reinstall to full dimension or switch to dense-pack cellulose where wiring density demands it.
- CertainTeed SmartBatt with MoistureSense degraded in coastal-zone crawl spaces. The kraft facing fails when relative humidity stays above 70% for more than 30 consecutive days, which happens in Long Beach’s marine layer months near the port and Alamitos Bay. We remove the degraded facing, encapsulate the crawl with a 10-mil vapor barrier sealed to foundation walls, then reinstall unfaced batts or upgrade to closed-cell spray foam on rim joists.
- CertainTeed Optima loose-fill settled around recessed can lights. The fine-denim alternative fiber compacts when homeowners stack storage on attic flooring, creating direct thermal shorts around IC-rated housings that were never properly sealed. We lift the flooring, install pre-formed fire-rated covers sealed with mastic, then restore insulation depth with a calibrated blowing machine set to 0.5 pounds per cubic foot above settled density.
- CertainTeed TrueComfort spray foam shrinkage at roof-deck applications. Open-cell foam applied too thick in a single lift pulls away from rafter heels during Long Beach’s hot-dry Santa Ana cycles, creating hidden air channels. We cut back the separated foam, re-establish adhesion with a primer coat, then apply in two 3-inch lifts with a 24-hour cure between - and we document the repair with photos you keep.
Our CertainTeed Home Energy Audit Process
- 1
Call and schedule. A live person answers 24/7. We book a 2-hour window and text you when the technician departs.
- 2
On-site blower-door test. We depressurize the house to 50 pascals and record the CFM50 baseline - the single number that tells us how much conditioned air your envelope is hemorrhaging.
- 3
Thermal imaging and insulation inspection. Our FLIR camera maps thermal bridging, missing insulation pockets, and moisture anomalies in CertainTeed assemblies. We measure existing R-values with a depth probe before quoting anything.
- 4
Duct leakage test if indicated. We pressurize the duct system and quantify leakage to outside - a separate figure from envelope leakage, since your attic ducts are outside the thermal boundary in most Long Beach homes.
- 5
Written scope and price. Haven Standard Clause 1: flat price, written scope, written warranty before anyone lifts a tool. No exceptions.
- 6
Execution and documentation. We seal first, then insulate. After completion, we run a second blower-door test and hand you a one-page report with pre- and post-CFM50, insulation depth readings, and photos of every sealed location.
What CertainTeed Home Energy Audit Costs in Long Beach
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Blower-door test with thermal imaging | $350-$550 | Home size, number of HVAC zones, crawl space access |
| Insulation inspection and R-value mapping | $200-$400 | Attic square footage, vaulted ceiling complexity |
| Duct leakage test (separate from blower door) | $250-$450 | Duct accessibility, number of return plenums |
| Full home energy audit (all diagnostics above) | $650-$950 | Home age, square footage, whether we find active rodent damage |
Homes near the coast in Belmont Shore or Naples often show higher moisture-driven degradation in CertainTeed faced products, which can extend diagnostic time. We do not upsell remediation during the audit; you get a written findings report with prioritized recommendations and a separate price for any work you choose to proceed with. Call (424) 415-7031 for a free estimate.
Why Long Beach Homeowners Call Topside Attic Insulation Long Beach for CertainTeed Work
We’ve sealed and insulated over 9,000 homes since 2016, and we treat air sealing as a hard prerequisite, not an upsell. Our technicians are background-checked, uniformed, and trained on CertainTeed’s full product line, from legacy batts to current loose-fill systems. We also service Reflectix and other major brands, so we’re not pushing replacement with a proprietary product. Every job closes with a Documented Photo Record and, where applicable, before-and-after blower-door numbers you can verify yourself. The 365-Day Done Right Promise applies to all completed work. Measure first, then insulate - otherwise you’re just trapping the problem.
FAQs
No. As an independent CertainTeed service provider, we document existing conditions with photos and depth readings without altering the installed product unless you authorize separate remediation work. If we do perform remediation, we use installation practices that meet or exceed CertainTeed’s published guidelines. Call (424) 415-7031 to schedule - estimates are free.
Yes. We source materials from CertainTeed, Owens Corning, Johns Manville, Knauf, Rockwool, and other manufacturers, with no proprietary lock-in. For repairs, we match the existing product line when it’s still in production; when a line is discontinued, we specify the closest-performing alternative in writing before installation. Call (424) 415-7031 for a free estimate.
Repair is usually cheaper when the failure is localized settling, compression, or minor moisture staining in a dry crawl space. Full replacement makes sense when the product is below 50% of labeled R-value across more than 60% of the envelope, or when we find active rodent infestation requiring removal and sanitization. We give you both prices in writing so you decide. Call (424) 415-7031 for an exact quote - estimates are free.
We typically schedule within 48 hours and complete the full diagnostic same day, including blower-door test, thermal imaging, and duct leakage testing if requested. Same-week scheduling is usually available in Bixby Knolls, Belmont Heights, and the Traffic Circle area; homes further east near El Dorado Park may require an additional day. Call (424) 415-7031 to check current availability.
You get a one-page report with pre-install insulation depth readings, thermal images with temperature annotations, the blower-door CFM50 figure, and a written scope with flat pricing for any recommended work. Wes Okafor initiated this reporting format after years of hearing homeowners say they never understood what they paid for. The report is yours whether or not you proceed with remediation.
Written by Wes Okafor, Owner, Topside Attic Insulation Long Beach at Topside Attic Insulation Long Beach, serving Long Beach and nearby areas.